Skip to content
BenchMesh
Download

Hantek · Power supply

Hantek PPS2320A software

Remote control and data logging for the Hantek PPS2320A power supply, on Windows, Linux and macOS - with the same panel BenchMesh uses for every power supply.

Awaiting confirmation

Status

Very likely. Support for the Hantek PPS2320A was written from Hantek’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real PPS2320A yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.

Note: identify reply taken from the sheet's example ('Like 3203'); PPS2116A not included: its model reply is undocumented

What you can do from BenchMesh

Power supply panel 2 channels

Live readings

  • CC
  • CV
  • IOUT
  • OUTPUT
  • POUT
  • REMOTE
  • SBY
  • VOUT

Settings you can change

  • Current
  • Output
  • Voltage

Connections

USB-serial / RS-232
9600 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port.

Sources

The definition was written from these documents (definition hantek_pps v0.1.0).

  • Hantek power supply communication protocol (DOC/hantek_pps/doc/hantek_power_supply_communication_protocol.pdf), pages 1-2

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMeshHow to confirm an instrument

Questions

Does BenchMesh work with the Hantek PPS2320A?
Very likely. Support for the Hantek PPS2320A was written from Hantek’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real PPS2320A yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
How do I connect the PPS2320A to my PC?
Over USB-serial / RS-232. 9600 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port. Then press Detect in BenchMesh: it identifies the power supply by its reply and adds it to the bench.
What can I control on the PPS2320A?
Power supply: set current, output, voltage; read cc, cv, iout, output, pout, remote, sby, vout.
Can I log PPS2320A measurements to CSV?
Yes. Right-click any reading to add it to a recording; every instrument on the bench is sampled on one shared timeline and exported as one CSV.
Is BenchMesh free?
Yes. BenchMesh is free and open source, for Windows, Linux and macOS, and works offline.