Keithley · Multimeter
Keithley 2110 software
Remote control and data logging for the Keithley 2110 multimeter, on Windows, Linux and macOS - with the same panel BenchMesh uses for every multimeter.
Status
Very likely. Support for the Keithley 2110 was written from Keithley’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real 2110 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
Note: In COMPATIBLE mode SYST:IDNS can change the *IDN? reply; keep the default identification
What you can do from BenchMesh
Multimeter panel 1 channel
Live readings
- MEAS
- MODE
- OVERLOAD
- RANGE
Settings you can change
- Mode
- Range
- Rate
- Temp scale
- Temp sensor
Connections
- USB-TMC
- USB Test & Measurement Class (USB id 05e6:2110). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click.
Sources
The definition was written from these documents (definition keithley_2110 v0.1.0).
- Model 2110 5½ Digit Multimeter Reference Manual 2110-901-01 Rev. C (Aug 2013), pages 1-2 (ranges), 5-6 (*IDN?), 5-14 (:CONFigure), 5-26..5-27 (SENSe summary), 5-38 (NPLC), 5-45 (FUNCtion), 5-51 (TCOuple:TYPE), 5-55 (RTD:TYPE), 5-59 (TRANsducer), 5-60 (UNIT), 5-63 (NPLC values)
Have one on your bench?
Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.
Questions
- Does BenchMesh work with the Keithley 2110?
- Very likely. Support for the Keithley 2110 was written from Keithley’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real 2110 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
- How do I connect the 2110 to my PC?
- Over USB-TMC. USB Test & Measurement Class (USB id 05e6:2110). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click. Then press Detect in BenchMesh: it identifies the multimeter by its reply and adds it to the bench.
- What can I control on the 2110?
- Multimeter: set mode, range, rate, temp scale, temp sensor; read meas, mode, overload, range.
- Can I log 2110 measurements to CSV?
- Yes. Right-click any reading to add it to a recording; every instrument on the bench is sampled on one shared timeline and exported as one CSV.
- Is BenchMesh free?
- Yes. BenchMesh is free and open source, for Windows, Linux and macOS, and works offline.