OWON · Waveform generator
OWON DGE3062 software
Remote control and data logging for the OWON DGE3062 waveform generator, on Windows, Linux and macOS - with the same panel BenchMesh uses for every waveform generator.
Status
Very likely. Support for the OWON DGE3062 was written from OWON’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real DGE3062 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
Note: Not covered by the DGE2000 manuals; channel count unverified
What you can do from BenchMesh
Waveform generator panel 2 channels
Live readings
- AMPL
- FREQ
- OFFS
- OUTPUT
- PHASE
- SHAPE
- SYMM
Settings you can change
- Amplitude
- Frequency
- Offset
- Output
- Phase
- Shape
- Symmetry
Connections
- USB-TMC
- USB Test & Measurement Class (USB id 5345:1235). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click.
Sources
The definition was written from these documents (definition owon_dge v1.0.0).
- DGE2000/3000 SCPI Protocol, pages 5-39
- DGE2000 Arbitrary Waveform Generator User Manual, pages 38-49
Have one on your bench?
Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.
Questions
- Does BenchMesh work with the OWON DGE3062?
- Very likely. Support for the OWON DGE3062 was written from OWON’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real DGE3062 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
- How do I connect the DGE3062 to my PC?
- Over USB-TMC. USB Test & Measurement Class (USB id 5345:1235). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click. Then press Detect in BenchMesh: it identifies the waveform generator by its reply and adds it to the bench.
- What can I control on the DGE3062?
- Waveform generator: set amplitude, frequency, offset, output, phase, shape, symmetry; read ampl, freq, offs, output, phase, shape, symm.
- Can I log DGE3062 measurements to CSV?
- Yes. Right-click any reading to add it to a recording; every instrument on the bench is sampled on one shared timeline and exported as one CSV.
- Is BenchMesh free?
- Yes. BenchMesh is free and open source, for Windows, Linux and macOS, and works offline.