OWON · Power supply
OWON ODP6033 software
Remote control and data logging for the OWON ODP6033 power supply, on Windows, Linux and macOS - with the same panel BenchMesh uses for every power supply.
Awaiting confirmation
Status
Very likely. Support for the OWON ODP6033 was written from OWON’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real ODP6033 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
What you can do from BenchMesh
Power supply panel 3 channels
Live readings
- IOUT
- OUTPUT
- POUT
- REMOTE
- SBY
- VOUT
Settings you can change
- Current
- Current limit
- Output
- Voltage
- Voltage limit
Connections
- USB-serial / RS-232
- 115200 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port.
Notes
- Not supported (yet)LAN named in the programming manual but no port documented.
Sources
The definition was written from these documents (definition owon_odp v0.1.0).
- OWON ODP Series DC Power Supply Programming Manual (ODP3033/3063/6033/3122/6062), pages 3-17
Have one on your bench?
Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.
Questions
- Does BenchMesh work with the OWON ODP6033?
- Very likely. Support for the OWON ODP6033 was written from OWON’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real ODP6033 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
- How do I connect the ODP6033 to my PC?
- Over USB-serial / RS-232. 115200 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port. Then press Detect in BenchMesh: it identifies the power supply by its reply and adds it to the bench.
- What can I control on the ODP6033?
- Power supply: set current, current limit, output, voltage, voltage limit; read iout, output, pout, remote, sby, vout.
- Can I log ODP6033 measurements to CSV?
- Yes. Right-click any reading to add it to a recording; every instrument on the bench is sampled on one shared timeline and exported as one CSV.
- Is BenchMesh free?
- Yes. BenchMesh is free and open source, for Windows, Linux and macOS, and works offline.