Skip to content
BenchMesh
Download

OWON · Electronic load

OWON OEL1515 software

Remote control and data logging for the OWON OEL1515 electronic load, on Windows, Linux and macOS - with the same panel BenchMesh uses for every electronic load.

Bench-tested

Status

Yes. The OWON OEL1515 is bench-tested: it runs on the BenchMesh maintainers’ bench with every control checked against the real instrument.

What you can do from BenchMesh

Electronic load panel 1 channel

Live readings

  • IIN
  • INPUT
  • MODE
  • OCP
  • OPP
  • OVP
  • PIN
  • REMOTE
  • VIN

Settings you can change

  • Curr
  • Input
  • Mode
  • Pow
  • Remote
  • Remote compensation
  • Res
  • Short
  • Volt

Connections

USB-serial / RS-232
115200 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port.

Sources

The definition was written from these documents (definition owon_oel v1.0.0).

  • OEL15_30 Series SCPI Programming Manual, pages 11-42
  • OEL15&30 Series DC Electronic Load User Manual, pages 14-37

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMeshHow to confirm an instrument

Questions

Does BenchMesh work with the OWON OEL1515?
Yes. The OWON OEL1515 is bench-tested: it runs on the BenchMesh maintainers’ bench with every control checked against the real instrument.
How do I connect the OEL1515 to my PC?
Over USB-serial / RS-232. 115200 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port. Then press Detect in BenchMesh: it identifies the electronic load by its reply and adds it to the bench.
What can I control on the OEL1515?
Electronic load: set curr, input, mode, pow, remote, remote compensation, res, short; read iin, input, mode, ocp, opp, ovp, pin, remote.
Can I log OEL1515 measurements to CSV?
Yes. Right-click any reading to add it to a recording; every instrument on the bench is sampled on one shared timeline and exported as one CSV.
Is BenchMesh free?
Yes. BenchMesh is free and open source, for Windows, Linux and macOS, and works offline.

Other OEL15/30 series DC electronic load models