OWON · Power supply

OWON SP / SPE / SPS single-output DC power supply (+ Kiprim DC310S/DC605S)

BenchMesh controls the OWON SP / SPE / SPS single-output DC power supply (+ Kiprim DC310S/DC605S) from your PC: live readings on a power supply panel, every setting within reach, and every value recordable on one timeline with the rest of your bench.

Models

Model	Status	Note
SPE3051	Awaiting confirmation
SPE3102	Awaiting confirmation
SPE3103	Awaiting confirmation
SPE6053	Awaiting confirmation
SPE6102	Awaiting confirmation
SPE6103	Awaiting confirmation
SP3103	Awaiting confirmation
SP6103	Awaiting confirmation
DC310S	Awaiting confirmation	Kiprim rebrand of the SPE3103 class; MEAS:ALL:INFO? support unconfirmed
DC605S	Awaiting confirmation	Kiprim rebrand; MEAS:ALL:INFO? support unconfirmed
SP/SPE/SPS	Awaiting confirmation	Other SP/SPE/SPS models (e.g. SP80xx, SPS): limits not known, the setters accept up to 61 V / 10.1 A

What you can do from BenchMesh

Power supply panel 1 channel

Live readings

CC
CV
FAIL
IOUT
OCP
OTP
OUTPUT
OVP
POUT
REMOTE
SBY
VOUT

Settings you can change

Current
Current limit
Output
Remote
Voltage
Voltage limit

Connections

USB-serial / RS-232: 115200 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port.

Notes

Not supported (yet)-L (LAN) variants: no socket port documented.

Sources

The definition was written from these documents (definition owon_spe v0.1.0).

OWON Single Channel DC Power Supply Programming Manual (SP_and_SPE_SPS_programming_manual.pdf), pages 4-10
OWON SPE Series Single Output Power Supply User Manual V1.0.5, pages 4-6 (rear USB device port = PC control)
OWON SP Series Single Output Power Supply User Manual, pages 15-17 (RS232, 115200 8N1 factory default)

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMesh How to confirm an instrument