Siglent · Power supply
Siglent SPD1168X software
Remote control and data logging for the Siglent SPD1168X power supply, on Windows, Linux and macOS - with the same panel BenchMesh uses for every power supply.
Status
Very likely. Support for the Siglent SPD1168X was written from Siglent’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real SPD1168X yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
What you can do from BenchMesh
Power supply panel 1 channel
Live readings
- CC
- CV
- IOUT
- OUTPUT
- POUT
- REMOTE
- SBY
- VOUT
Settings you can change
- Current
- Current limit
- Output
- Remote
- Voltage
- Voltage limit
Connections
- USB-TMC
- USB Test & Measurement Class (USB id f4ec:1300). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click.
- LAN (SCPI socket)
- TCP port 5025. Enter the instrument’s IP address.
Sources
The definition was written from these documents (definition siglent_spd1000x v0.1.0).
- SPD1000X User Manual / Programming Guide (SPD1000X_UserManual_ProgrammingGuide.pdf), printed pages, pages 16 (ratings), 51 (socket port 5025), 54-63 (commands), 73 (USBTMC example 0xF4EC:0x1300)
Have one on your bench?
Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.
Questions
- Does BenchMesh work with the Siglent SPD1168X?
- Very likely. Support for the Siglent SPD1168X was written from Siglent’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real SPD1168X yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
- How do I connect the SPD1168X to my PC?
- Over USB-TMC or LAN (SCPI socket). USB Test & Measurement Class (USB id f4ec:1300). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click. Then press Detect in BenchMesh: it identifies the power supply by its reply and adds it to the bench.
- What can I control on the SPD1168X?
- Power supply: set current, current limit, output, remote, voltage, voltage limit; read cc, cv, iout, output, pout, remote, sby, vout.
- Can I log SPD1168X measurements to CSV?
- Yes. Right-click any reading to add it to a recording; every instrument on the bench is sampled on one shared timeline and exported as one CSV.
- Is BenchMesh free?
- Yes. BenchMesh is free and open source, for Windows, Linux and macOS, and works offline.