TENMA · Power supply
TENMA 72-2710 software
Remote control and data logging for the TENMA 72-2710 power supply, on Windows, Linux and macOS - with the same panel BenchMesh uses for every power supply.
Awaiting confirmation
Status
Very likely. Support for the TENMA 72-2710 was written from TENMA’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real 72-2710 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
What you can do from BenchMesh
Power supply panel 1 channel
Live readings
- CC
- CV
- IOUT
- OUTPUT
- POUT
- REMOTE
- SBY
- VOUT
Settings you can change
- Current
- Ocp
- Output
- Ovp
- Voltage
Connections
- USB-serial / RS-232
- 9600 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port.
Notes
- Known issue72-13320/13330 and 72-13360 use different protocols from the 72-2540 (line-feed terminator, per-channel output, other status layout): not yet modelled.
Sources
The definition was written from these documents (definition tenma_72 v1.0.0).
- Series Protocol V2.0 of Remote Control, pages 1-2
- TENMA 72-2540 User Manual, pages 3-9
Have one on your bench?
Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.
Questions
- Does BenchMesh work with the TENMA 72-2710?
- Very likely. Support for the TENMA 72-2710 was written from TENMA’s programming manual and follows the same engine as the bench-tested instruments, but nobody has confirmed it on a real 72-2710 yet. If you own one, connecting it once and reporting the result moves it to Community-confirmed.
- How do I connect the 72-2710 to my PC?
- Over USB-serial / RS-232. 9600 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port. Then press Detect in BenchMesh: it identifies the power supply by its reply and adds it to the bench.
- What can I control on the 72-2710?
- Power supply: set current, ocp, output, ovp, voltage; read cc, cv, iout, output, pout, remote, sby, vout.
- Can I log 72-2710 measurements to CSV?
- Yes. Right-click any reading to add it to a recording; every instrument on the bench is sampled on one shared timeline and exported as one CSV.
- Is BenchMesh free?
- Yes. BenchMesh is free and open source, for Windows, Linux and macOS, and works offline.