Hantek · Multimeter

Hantek HDM3000 series digital multimeter

BenchMesh controls the Hantek HDM3000 series digital multimeter from your PC: live readings on a multimeter panel, every setting within reach, and every value recordable on one timeline with the rest of your bench.

Models

Model	Status	Note
HDM3055	Awaiting confirmation	LAN (socket 5025) only on the B, H and X variants; S/A variants have USB + RS-232/485 only (UG p.22). RS-232/485 settings undocumented: not offered. GPIB (H) not supported
HDM3065	Awaiting confirmation	LAN (socket 5025) only on the B, H and X variants; S/A variants have USB + RS-232/485 only (UG p.22). RS-232/485 settings undocumented: not offered. GPIB (H) not supported
HDM3075	Awaiting confirmation	LAN (socket 5025) only on the B, H and X variants; S/A variants have USB + RS-232/485 only (UG p.22). RS-232/485 settings undocumented: not offered. GPIB (H) not supported

What you can do from BenchMesh

Multimeter panel 1 channel

Live readings

MEAS
MODE
OVERLOAD
RANGE

Settings you can change

Mode
Range
Rate
Temp scale
Temp sensor

Connections

USB-TMC: USB Test & Measurement Class. No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click.
LAN (SCPI socket): TCP port 5025. Enter the instrument’s IP address.

Notes

Interface on some models onlyLAN only on the B / H / X variants.
Not supported (yet)RS-232/485 settings are not documented.

Sources

The definition was written from these documents (definition hantek_hdm3000 v0.1.0).

HDM3000 SCPI Programming Reference EN Ver1.03, pages 14-19 (CONFigure, FUNCtion), 23-27 (VOLT/CURR ranges, NPLC), 43 (CAP), 48 (UNIT)
HDM3000 User Guide EN Ver2.6, pages 22 (models/interfaces), 95-97 (USB TMC, LAN socket 5025)

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMesh How to confirm an instrument