Keysight · Oscilloscope

Keysight InfiniiVision 1000 X / 2000 X / 3000T series oscilloscope

BenchMesh controls the Keysight InfiniiVision 1000 X / 2000 X / 3000T series oscilloscope from your PC: live readings on a oscilloscope panel, every setting within reach, and every value recordable on one timeline with the rest of your bench.

Models

Model	Status	Note
EDUX1002A	Awaiting confirmation	no LAN: USB only (1000 X guide p29)
EDUX1052G	Awaiting confirmation	LAN not confirmed; 1200 X guide not fetched; same tree
DSOX1102A	Awaiting confirmation	no LAN: USB only (1000 X guide p29). 100 MHz with the DSOX1B7T102 upgrade
DSOX1202G	Awaiting confirmation	LAN not confirmed; 1200 X guide not fetched; bandwidth upgradable to 200 MHz
DSOX1204G	Awaiting confirmation	LAN not confirmed; 1200 X guide not fetched; bandwidth upgradable to 200 MHz
DSO-X 2002A	Awaiting confirmation	LAN only with the LAN/VGA option module (2000 X guide p41)
DSO-X 2004A	Awaiting confirmation	LAN only with the LAN/VGA option module (2000 X guide p41)
DSO-X 2012A	Awaiting confirmation	LAN only with the LAN/VGA option module (2000 X guide p41)
DSO-X 2014A	Awaiting confirmation	LAN only with the LAN/VGA option module (2000 X guide p41)
DSO-X 2022A	Awaiting confirmation	LAN only with the LAN/VGA option module (2000 X guide p41)
DSO-X 2024A	Awaiting confirmation	LAN only with the LAN/VGA option module (2000 X guide p41)
DSOX3000T	Awaiting confirmation	LAN standard (community, not in a fetched guide). 3000T guide not fetched; same tree. Bandwidth from the model number (100 MHz-1 GHz)
DSOX3000T 2ch	Awaiting confirmation	LAN standard (community, not in a fetched guide). 3000T guide not fetched; same tree

What you can do from BenchMesh

Oscilloscope panel 4 channels

Live readings

ACQ TYPE
BWLIMIT
COUPLING
DISPLAY
FREQ
INVERT
OFFSET
PROBE
SCALE
SRATE
TIMEBASE
TIMEOFFSET
TRIG LEVEL
TRIG SLOPE
TRIG SOURCE
TRIG STATUS
TRIG SWEEP
VAVG
VPP
VRMS

Settings you can change

Acquire type
Bwlimit
Coupling
Display
Invert
Offset
Probe
Run
Scale
Timebase
Timebase offset
Trigger level
Trigger slope
Trigger source
Trigger sweep

Connections

USB-TMC: USB Test & Measurement Class (USB id 2a8d). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click.
LAN (SCPI socket): TCP port 5025. Enter the instrument’s IP address.

Notes

Interface on some models only1000 X: EDUX1002A / DSOX1102A have no LAN. 2000 X: LAN only with the LAN/VGA module. 1200 X: unconfirmed. 3000T: community only.
To confirm on first contactUSB vendor 2a8d only; Agilent-era units use 0957; product ids differ per model.
Known issueSingle-shot never reads back (the sweep query returns AUTO/NORM only), so the UI confirmation of Single times out.

Sources

The definition was written from these documents (definition keysight_infiniivision v0.1.0).

Keysight InfiniiVision 1000 X-Series Programmer's Guide v01.20 (1000X_ProgrammersGuide_v01.20_akmetron.pdf), pages p3 models, p116 *IDN?, p137-163 root (:AUToscale :OPERegister:CONDition? :RUN :SINGle :STOP), p188-189 ACQuire, p205-219 CHANnel, p347 9.9E+37, p360-385 MEASure, p564-590 TIMebase/TRIGger, p630-648 WAVeform
Agilent InfiniiVision 2000 X-Series Programmer's Guide v02.30 (2000X_ProgrammersGuide_xdevs.pdf), pages p3 models, p130 *IDN? (AGILENT TECHNOLOGIES), p167 OPERegister, p220-234 CHANnel, p351-373 MEASure, p580-606 TIMebase/TRIGger, p639-644 WAVeform

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMesh How to confirm an instrument