OWON · Multimeter

OWON XDM1000 series digital multimeter

BenchMesh controls the OWON XDM1000 series digital multimeter from your PC: live readings on a multimeter panel, every setting within reach, and every value recordable on one timeline with the rest of your bench.

Models

Model	Status	Note
XDM1241	Bench-tested
XDM1041	Awaiting confirmation
XDM1141	Awaiting confirmation
XDM2041	Awaiting confirmation	Same programming manual (XDM1041&XDM2041 edition); RS-232 only (DB9, UM p.14, p.41). The 2041-only PM edition prints CONF without the AUTO keyword: verify mode changes

What you can do from BenchMesh

Multimeter panel 1 channel

Live readings

MEAS
MODE
RANGE

Settings you can change

Mode
Range
Rate
Temp scale
Temp sensor

Connections

USB-serial / RS-232: 115200 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port.

Notes

Known issueOverload is reported as 1E9 (would read as 1 GΩ); diode and continuity swapped below firmware V4.3; 4-wire resistance only on 2041/3041/3051.

Sources

The definition was written from these documents (definition owon_xdm v1.0.0).

XDM1000 Digital Multimeter Programming Manual, pages 7-26
OWON XDM1141 User Manual, pages 17-39

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMesh How to confirm an instrument