Siglent · Oscilloscope

Siglent SDS2000X Plus series digital oscilloscope

BenchMesh controls the Siglent SDS2000X Plus series digital oscilloscope from your PC: live readings on a oscilloscope panel, every setting within reach, and every value recordable on one timeline with the rest of your bench.

Models

Model	Status	Note
SDS2102X Plus	Awaiting confirmation
SDS2104X Plus	Awaiting confirmation
SDS2202X Plus	Awaiting confirmation
SDS2204X Plus	Awaiting confirmation
SDS2354X Plus	Awaiting confirmation

What you can do from BenchMesh

Oscilloscope panel 4 channels

Live readings

ACQ TYPE
BWLIMIT
COUPLING
DISPLAY
FREQ
INVERT
OFFSET
PROBE
SCALE
SRATE
TIMEBASE
TIMEOFFSET
TRIG LEVEL
TRIG SLOPE
TRIG SOURCE
TRIG STATUS
TRIG SWEEP
VAVG
VPP
VRMS

Settings you can change

Acquire type
Bwlimit
Coupling
Display
Invert
Offset
Probe
Run
Scale
Timebase
Timebase offset
Trigger level
Trigger slope
Trigger source
Trigger sweep

Connections

USB-TMC: USB Test & Measurement Class (USB id f4ec). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click.
LAN (SCPI socket): TCP port 5025. Enter the instrument’s IP address.

Sources

The definition was written from these documents (definition siglent_sds2000xplus v0.1.0).

SDS Series Programming Guide EN11F (SDS_Series_ProgrammingGuide.pdf), pages PDF p18 supported models (SDS2000X Plus from firmware 1.3.5R3), p30 *IDN?, p41-47 ACQuire (RESolution p43), p50-60 CHANnel, p304 MEASure:SIMPle:VALue?, p412-431 TIMebase/TRIGger, p683-695 WAVeform (WIDTh p689, DATA p693)

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMesh How to confirm an instrument