OWON · Multimeter

OWON XDM3000 series digital multimeter

BenchMesh controls the OWON XDM3000 series digital multimeter from your PC: live readings on a multimeter panel, every setting within reach, and every value recordable on one timeline with the rest of your bench.

Models

Model	Status	Note
XDM3051	Awaiting confirmation
XDM3041	Awaiting confirmation

What you can do from BenchMesh

Multimeter panel 1 channel

Live readings

MEAS
MODE
OVERLOAD
RANGE

Settings you can change

Mode
Range
Rate
Temp scale
Temp sensor

Connections

USB-serial / RS-232: 115200 baud, 8N1. Plug in the USB cable (or a USB-RS-232 adapter); BenchMesh finds the port.
USB-TMC: USB Test & Measurement Class (USB id 5345:1234). No vendor driver needed on Linux; on Windows BenchMesh installs Microsoft’s WinUSB driver with one click.
LAN (SCPI socket): TCP port 3000. Enter the instrument’s IP address.

Notes

To confirm on first contactUSB-TMC 5345:1234 from a community tool; LAN factory port 3000 (user manual p.42).
Known issueCommunity: do not use above 57600 baud on the serial link; slow rate letter is S (not L).

Sources

The definition was written from these documents (definition owon_xdm3000 v0.1.0).

XDM Series Digital Multimeter Programming Manual (XDM3041/XDM3051), pages 6-41 (printed)
XDM Series Digital Multimeters User Manual, pages 17-29 (overload), 38-39 (interfaces), factory defaults table

Have one on your bench?

Connect it, press Detect, try the controls - then tell us how it went. Every confirmation moves a model from “Awaiting” to “Community-confirmed” for everyone.

Download BenchMesh How to confirm an instrument